Once you have decided to stain your wood deck, it goes without saying that finding a quality deck stain is going to make all the difference. Whether you are restoring an older deck or wanting to protect a newer one, it's crucial to use the best deck stain you can find.For the do-it-yourselfer it's a good idea to sit down and figure out what goals you have as far as a deck stain. Do you want the best appearance possible? Are you looking for the longest lasting deck stain? Perhaps something user friendly and easy to apply is what you are looking for - or maybe all of the above.
Today's market is flooded with many different types and brands of deck stain. Some are very effective wood stains while others do not compare. One of the worst things a do-it-yourselfer can do is to use an inferior deck stain that fails prematurely and leaves the deck in shambles. Some of the big box stores are guilty of selling inferior deck stains that end up flaking and peeling and are then almost impossible to get completely off the wood so you can start from scratch again.
Be aware of acrylic based deck stains and those that are enhanced with silicone. Solid colored stains are also best avoided. They leave a film on the wood similar to paint and will also be prone to cracking and peeling.
What professional wood experts recommend is a semi-transparent deck stain. This type of stain penetrates the wood to lock out moisture and UV damage. Semi-transparent deck stains will simply fade over time as opposed to peeling. This makes the deck much easier to maintain every couple of years.
One of the best deck stains for wood decks, fences, siding, cedar shakes, log homes, and other wood structures is TWP 1500 series deck stain. This improved version of TWP penetrates better, dries faster, and outperforms the previous TWP 500 series stain formula.
For over 20 years TWP (Total Wood Preservative) has been the choice for wood protection by both homeowners and professional contractors. The TWP 1500 is an EPA registered wood preservative which helps prevent wood decay, rot, and structural damage to exterior wood surfaces. The TWP 1500 series resists moisture and water damage for optimal protection and a long lasting finish. It's user friendly and can be cleaned and recoated easily to preserve the natural color of the wood. TWP is a trusted name that will allow you to enjoy your investment for years to come.
Having the right tools for any job is important and deck restoration is no exception. Many of the tools needed for restoring or maintaining a wood deck are available for purchase or rent. A pressure washer or stiff broom will work up debris and dirt that has collected and settled into the wood. Paint brushes, rollers, or stain pads can be used to apply new stain to the wood. Other materials like paint thinner, plastic tarps, buckets, and paint trays will also be necessary to complete the stain job.
Just as important as having the right tools is using the right deck maintenance products. To prepare the wood properly you have to use a quality deck cleaner followed by a deck brightener. The deck cleaners are normally applied with a pump up sprayer. The wood is then cleaned using a pressure washer or a stiff broom. Agitating the wood and using the right cleaners will work up any pollutants down deep leaving a clean surface for the deck stain to penetrate.
Once the wood has been cleaned using a deck cleaner and the right tools, it needs to be brightened back to the proper pH level. This second step of cleaning a deck is extremely important. Apply a wood deck brightener to the wood just like you did the deck cleaner. Allow it to dwell for the proper amount of time followed by a thorough rinsing. This leaves the wood more acidic and will ensure proper penetration and protection from the deck stain that will be applied later on.
After the wood is clean and allowed to dry, a deck stain or sealer should be applied to protect the wood from the elements. There are different methods for applying a stain but it's important to follow the directions on the can. The biggest mistake people make when sealing a deck is to over-apply the deck stain. Too much stain creates build up and leaves a film on the surfaces that will lead to flaking and peeling.
Restoring your own wood deck is something you can do with the right tools and products. Do some research to find contractor grade materials and it will make the job and the results that much better. Gather the information you need to educate yourself a little about deck restoration and be confident that you can restore your own deck to ensure you get years of use from it.
To get the most out of a wood deck it needs to be protected from the environment and harsh weather conditions. Harmful UV rays and moisture can lessen the longevity of a wood deck in no time. Protecting the wood will block out these damaging conditions giving you many years of enjoyment from your deck.
To provide protection to a wooden deck you have a number of choices. Protective finishes like deck stains and wood deck sealers come in several colors and opacities. Semi-transparent and semi-solid deck stains are definitely in a class by their own when it comes to superior wood protection.
Some homeowners wonder if paint is a good option of protection. Most restoration professionals agree that paint does not hold up well on a deck. If you've ever seen a solid stained or painted deck that has failed you probably noticed the flaking and peeling. This is very common with paints and also big box store solid deck stains which are basically a thin paint.
Wood contracts and expands naturally with altering temperatures and climates. Paints also contract and expand but at a different rate than wood. This variance in flexibility causes the paint to crack and eventually peel over a period of time.
When the bottom sides of the deck boards are not protected, such in most cases, moisture is still able to penetrate the wood. A heavy pigmented paint or stain traps the moisture in the wood unlike a more breathable deck stain. This phenomenon causes the paint to crack, flake, and peel. Generally the problem is first noticeable near the edges of each deck board.
Why You Shouldn't Paint a Deck
Requires time, rigorous labor and methods to maintain.
Can require 2 coats to be more effective in the elements raising costs.
May require a primer to be used first.
Will inevitably fail, and when it does, it's expensive to have removed before refinishing.
Semi-transparent deck stains are much more maintainable. They can have tint added to them as well for a unique look. A quality deck stain penetrates the wood unlike paint which creates a film on the surface that is susceptible to peeling. Penetrating deck stains and sealers are a good choice for shielding your wooden deck from Mother Nature.
Protecting your wood deck from the elements is a necessity if you want it to last, but finding quality protection can be a bit of a dilemma with so many decking stains on the market.
Recently, there have been some deck stains that claim to last anywhere from 5-7 years on a deck. It's slapped right on the label to catch the consumer's eye. So how true is this claim?
Digging a little bit into the actual claim you begin to get suspicious and for good reason. A quick search will lead you to information where professionals are claiming they don't use these types of deck stains. To tell the truth, most of them don't recommend using the stain and go as far to say it's false advertising.
We found many complaints from consumers stating they had a bad experience with the 5-7 year deck stains. In most cases the stain didn't last any longer than other stains. The failing deck stain was said to water spot, flake, crack, or peel making a mess of their decks. There are even a host of lawsuits against these companies!
So how can these deck stain companies get away with such a bogus warranty? To look into their deck stain warranty is quite revealing. Once you read past that huge "5 year warranty" that is plastered on the front of every can, you'll see it's full of limitations and stipulations.
One warranty claimed it was good only "when applied to a properly prepared surface." But there are no guidelines or written laws that state what a properly prepared surface really is. What this means is at the time of a consumer complaint or claim the stain company themselves get to make the decision as to whether a surface was prepared correctly or not.
The warranty also states that "color fading and slight natural graying of the wood may occur during the warranty period." Any professional will tell you that fading or graying of the wood is actually sun damage. So essentially they are claiming their deck stain won't protect against UV damage.
Another one stated that "areas exposed to heavy traffic or excessive weather" are excluded from the warranty. These are just a few of the obvious loop holes these companies can jump through.
The truth is, what they are claiming is actually a very limited warranty and more times than not, they won't accept liability when the deck stain fails. But because their limited warranty is on the can (in small print) they can put the "5 year" or "7 year warranty" on the front of the can as large as they like and not break any laws.
The worst part about these stains is they don't last any longer than other deck stains. But because they are normally 100% acrylic or silicone enhanced they are exceedingly difficult and expensive to remove completely so a new deck stain can be applied. Some professionals even admit walking away from deck stain stripping jobs like this because they are, in their words, "a nightmare."
When it comes to maintaining your wood deck, it's best to use a wood deck cleaner and reseal it every couple of years using a quality 2-3 year deck stain. Concerning absurd deck stain warranties, just remember if it sounds too good to be true it probably is.
Over the years it has been said that you should let your deck "weather" for a year before cleaning and staining it. According to most wood restoration experts, this is nothing but an old myth. To the contrary, a deck is actually most vulnerable to water and sun damage during the first year. After 12 months the wood can begin to split and crack from moisture and will start turning gray from sun damage. At this point it's certainly not too late to have a wooden deck cleaned and waterproofed but the sooner the better.
Though you shouldn't wait a full year, there is somewhat of a small waiting period before you should have a new deck stained or sealed. New deck boards are full of moisture. You may have noticed how heavy a newer deck board is than an older one that has dried out over time. The drying out period before sealing a new deck really depends on the climate. In warmer months, a deck that sees quite a bit of direct sunlight might be ready to seal within 3 months. While a deck that is more shaded might take a little longer.
The wood should be at a 10-12 percent moisture level or less before applying any deck sealer. With a moisture meter you can determine an average moisture percentage by checking the wood in a few different areas. You certainly don't want to get impatient and seal the deck too soon. This traps moisture in the wood and will cause damage to the deck. It will also cause the new deck finish to fail prematurely costing you more time and money.
Once the wood is at a desired moisture level, don't delay in having it sealed. It's also important to note that although the deck may be fairly new, it's crucial to wash the wood before sealing or staining it with a deck cleaner and wood brightener. Mill glaze and even small amounts of dirt and pollutants can jeopardize the longevity of the deck staining.
All of this talk about “green,” sustainable, LEED’s compliant, what does it mean, why is it important? Many markets have embraced this concept and are benefiting from the performance of these types of products. Gemini introduced Storm Shield Deck Stain in 2010 and has experienced significant growth in markets where there is demand for these types of products. Truckee, California and the Lake Tahoe area in particular have grown into major markets for this waterborne, environmentally friendly product based on the consumer based demand for green products that are safe for the environment, yet perform, and in many cases outperform, their solvent-based counterparts.
IPE exotic hardwood is from the Brazilian Ironwood family and has become in recent years a favorite for residential decks. Event though it is naturally resistant to rot and decay, IPE needs to be stained on an annual basis if you want to retain the rich color tones of the wood. If left neglected the IPE will gray within months.
One of the most popular questions that we get is "what is the best deck stain"? Unfortunately there is not a "best deck stain" but there are many high end deck and wood stains. The problem is trying to find the best deck stain for you and the environment that you live in.
There are many factors in which determine a high quality stain. Here are a few of the most popular
Protecting from UV Graying
Protection from Mold and Mildew
Minimizing Water Damage
Problem with determining what the best stain is that some work better then others based on the wood type you have, where you are located, etc.
www.bestdeckstains.com was designed to allow the consumer search for the proper stain to be used. There is a built in search feature that allows you to "filter" all the options to narrow down which stain would be best.
They also carry the Restore-A-Deck cleaners that have become the go to deck cleaner and deck brightener system for residential homeowners and professional contractors.
Your #1 source for exterior restoration supplies. Home Works Supply carries a premium selection of wood stain products, masonry waterproofing products, chimney repair and roof cleaning products with more added all the time.
A professional support staff to help you find the right product for you and and your restoration project!
The new TWP 1500 Series is now available. This new series will replace the current 500 series immediately and will eventually replace the TWP 100 Series when it becomes obsolete due to national changes in VOC laws.
All colors from both the 100 series and the 500 series are now available in the TWP 1500 Series. Please take note that the 1501 Cedartone is the same color as the TWP 501 Cedartone. The TWP 1530 Natural is the same color as TWP 101 Cedartone Natural.
The new TWP 1500 Series promises a faster drying/curing then the old TWP 500 Series with improved performance as well.
Key Features
Preserves natural wood color
EPA registered wood preservative
Professional choice for all exterior wood surfaces
Semi transparent stain preserves natural color
Sheds water longer
Prevents mold and mildew
Helps prevent wood rot
Easy to apply and can be cleaned and re coated as needed
Helps in the prevention of warping, cracking and splitting